7
CONNECTIONS
Caution:
Make all other connections before you connect the power
supply to standard AC power.
CONNECTING A DEVICE REQUIRING
POSITIVE AND NEGATIVE WIRES
1. Turn off the device requiring power.
2. Set the power supply’s
POWER
switch to
OFF
.
3. Turn the sleeves of the red and black binding output posts
counterclockwise to expose the wire holes.
4. Insert the device’s positive wire (usually red) into the red bind-
ing post’s wire hole, then tighten the binding post’s sleeve to
secure the wire in place.
22-506.fm Page 7 Friday, August 6, 1999 12:55 PM
Comments to this Manuals