Radio Shack VG-2 Guard Owner's Manual download pdf (Page 27)

REPLACING THE FUSE

If the detector stops operating, check the fuse in the DC power

cord’s cigarette-lighter plug. If it has blown, follow these steps

to replace it with a 2-Amp, 1

mm, fast-acting fuse (Cat.

No. 270-1007).

Caution:

Using a fuse that does not meet these ratings or

defeating the fuse protection can damage your detector or the

vehicle’s electrical system.

1. Carefully unscrew the tip of the cigarette-lighter plug.

2. Remove the tip from the cigarette-lighter plug, then

remove the old fuse.

Note:

Take care not to lose the spring inside the holder or

the metal ring.

3. Replace the fuse.

4. Press the cigarette-lighter plug’s tip down into the body,

then screw it back in.

Caution:

Be sure you press the cigarette-lighter plug’s tip

down before screwing it in, or you might damage the plug.

22-1698.fm Page 27 Friday, August 6, 1999 11:32 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

No comments

Radio Shack VG-2 Guard Owner's Manual Page 27