Radio-shack Wireless Remote Control System User Manual download pdf (Page 18)

Follow the procedure in “Controlling Additional Modules”

to test each receiver module. See “Intercom Systems” on

Page 28 if your system does not work properly.

CONTROLLING ADDITIONAL

MODULES

1. Set the remote control's slide switch to the group of 8

modules you want to control (

1–8

9–16

). For exam-

ple, if you set the switch to

1–8

, the buttons on the

remote control will control modules set to 1 through

Notes:

• Button 1 can also turn the receiver module on or

off.

• One side of the supplied label has numbers for

modules 1 through 8 printed on it, and the other

side has numbers for modules 9 through 16. Use

the side of the label that matches your installation.

2. Install additional Plug ’N Power modules (sold sepa-

rately) as desired, following the instructions included

with them.

61-2576.fm Page 18 Wednesday, September 8, 1999 1:50 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Radio-shack Wireless Remote Control System User Manual Page 18