Radio Shack 15-2143 Technical Information download pdf (Page 6)

1110

Code Search

If your product does not respond after you have tried all

the codes for your brand, or if your brand is not listed,

try searching for your code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be

controlled.

2. Press and hold the CODE SEARCH button until the

red indicator stays on, then release the CODE

SEARCH button.

3. Press and quickly release the desired mode button

(TV, VCR, etc.). The red indicator blinks off once.

4. Press the CHANNEL UP button repeatedly (up to 300

times) until the device to be controlled changes

channel. The red indicator blinks off with each

button press. If you accidentally overshoot the

code required, press the CHANNEL DOWN button

to backtrack through the library until the device

changes channel. Pressing CHANNEL UP changes

direction to forward again.

5. Press and release MUTE to install the code.

Most users will store VCR codes under the VCR button,

Satellite codes under SAT , etc. If (for example) you want

to store a VCR code under SAT, first follow the procedure

for Direct Code Entry (page 10) and press SAT in step 2

of Direct Code Entry, then enter ANY VCR code in step 3

of Direct Code Entry. Then follow the steps above for

Code Search (or Brand Search, page 12).

Note: If the device does not have a CHANNEL UP

button, use PLAY (VCR only) or POWER instead. Code

Search starts from the currently stored three digit

number under that mode.

Direct Code Entry

1. Press and hold the CODE SEARCH button until the

red indicator stays on, and then release the CODE

button.

2. Press and release the desired mode button (TV, VCR,

etc.). The red indicator blinks, and then stays lit.

3. Enter the three digit code from the code tables (on

separate sheet). Note: after a valid code entry, the

red indicator turns off. For an invalid code, the red

indicator flashes.

4. With your device on, press CHANNEL UP. If the

device responds, no further programming is

required. Note: If some buttons do not operate your

equipment, try one of the other codes for your

brand.

Code Entry

Write your codes down here for easy reference later.

Code Entry, cont.

Type Type stored Code

TV TV

VCR

DVD

SAT

CBL

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Radio Shack 15-2143 Technical Information Page 6

Comments to this Manuals

Related products and manuals for Remote controls Radio Shack 15-2143