Radio-shack PRO-2040 User Manual download pdf (Page 10)

For the best performance, consider

the following when deciding on an

outdoor base antenna and its loca-

tion:

• The location of the external

antenna should be as high as

possible.

• The external antenna and

antenna cable should be as far

away as possible from sources

of electrical noise (appliances,

other radios, and so on).

• The external antenna should be

vertical.

Mount the antenna following the in-

structions supplied with the antenna

and its mounting hardware, then fol-

low these steps to connect an exter-

nal antenna.

1. Route the antenna cable to the

scanner and connect it to the

ANT

jack on the back of the

scanner.

Caution:

Do not route the cable

over sharp edges or moving

objects.

2. Remove the supplied antenna

from the top of the scanner.

RESETTING THE

SCANNER’S DISPLAY

If the scanner’s display locks up after

you connect a power source, follow

these steps to reset it.

1. If the scanner is off, press

POWER

to turn it on.

2. Using a pointed object, such as

a straightened paper clip, press

RESET

on the back of the scan-

ner. The display resets, and the

scanner turns off.

3. Press

POWER

to turn on the

scanner again.

20-414.fm Page 10 Wednesday, August 4, 1999 11:12 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments

Radio-shack PRO-2040 User Manual Page 10

Comments to this Manuals

Related products and manuals for Scanners Radio-shack PRO-2040