Radio Shack Invisible Beam Entry Alert Owner's Manual download pdf (Page 9)

Installation

Or, follow these steps to mount the alert on a desk.

1. Place the alert on a desk and use it as a

template to mark the position of the two

screw holes on the desk.

2. Drill two

-inch holes in the marked

positions.

3. Thread the two supplied wood screws

through the holes on the alert and into the mounting sur-

face, then tighten the screws.

4. Plug the adapter into a standard AC outlet.

MOUNTING THE REFLECTOR

Use the supplied mounting bracket, screws and adhesive strips

to mount the reflector vertically or horizontally.

1. Using one half of the bracket as a template, mark the posi-

tion of the two screw holes.

2. Drill two

-inch holes in the

marked positions.

3. Thread one of the supplied wood

screws through each of the two

screw holes in the bracket and into

the mounting surface, then tighten

the screws.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Radio Shack Invisible Beam Entry Alert Owner's Manual Page 9