Radio Shack 43-327 User Manual download pdf (Page 8)

Telephone Operation

Installation Options

Your telephone base is now ready for table top use. If you want to mount

your telephone on a wall, use the provided wall bracket to connect with a

standard dual-stud telephone wall mounting plate. If you do not have this

mounting plate, you can purchase one from your local RadioShack store or

www.RadioShack.com. You might need professional assistance to install the

mounting plate.

Wall Mount Installation

1. Position the telephone base as shown below. Insert the extended tabs

(marked B) of the wall bracket into the slots on the back of the telephone

base (marked B). Push the telephone base down until it clicks into place.

2. If you are using a DSL ﬁlter, plug the line cord into the ﬁlter now. Route

the telephone line cord (or DSL ﬁlter) through the wall bracket hole.

Route the power cord out of the bottom of the telephone.

3. Plug the telephone line cord (or DSL ﬁlter) into the wall jack. Plug the

power adapter into a power outlet not controlled by a wall switch.

4. Align the holes on the bracket with the standard wall plate and slide the

bracket down until it locks securely. Bundle the telephone line cord and

power adapter cord neatly with a twist tie.

DSL ﬁlter

(optional, not

included)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

No comments

Radio Shack 43-327 User Manual Page 8