Radio Shack Caller Owner's Manual download pdf (Page 3)

3. Thread a screw through each hole, letting the head

extend

inch from the wall.

4. Attach the mounting bracket to the system (see

“Attaching the Mounting Bracket” on Page 2).

5. Route the phone line cords and AC adapter cord through the

slots on the back of the bracket.

6. Line up the keyhole slots on the bracket with the screws in the

wall, then slide the system down onto the screws until it is

secure.

CHANGING THE TIME AND DATE DISPLAY

The time and date is automatically set when your system receives its

first call. This information is sent by the phone company.

To toggle between viewing the time in the 12- or 24-hour formats, re-

peatedly press

DELETE

. To toggle between viewing the date format

in month, then date (M/D), or date, then month (D/M), hold down

DE-

LETE

USING THE AUTO DIMMER

The display automatically adjusts its brightness according to the am-

bient light. If the ambient light is too strong, the display becomes

brighter; otherwise, it will be dimmer.

Note:

The display has three brightness levels.

RECEIVING AND STORING CALLS

Caller ID is a service provided by your telephone company. When

you subscribe to this service, the telephone company sends the call-

er’s telephone number (and name, if available) and the call’s date

and time.

The system receives this information and displays the name (the

number will not display unless the caller name is not available) for

each call and updates the display with the current date and time.

Your system saves up to 50 call records, then replaces the oldest

call record with each new one.

During an incoming call, the LINE STATUS indicator flashes and

RINGING

appears on the display. Then

NEW

appears, followed by

the caller’s name (or the number if the name is not available). After

ringing stops by about 6 seconds, the call information is replaced by

the time display, and

NEW

flashes until you review the call records.

Note:

If any phone connected to the same telephone line is picked

up, the LINE STATUS indicator lights.

REVIEWING CALL RECORDS

Each time you receive a call, the system saves a call record in mem-

ory that you can see while you are on the phone or review later.

To scroll through the call records, repeatedly press

REVIEW6

Note:

If no call information is stored,

CALL

appears when you

press

REVIEW6

For each call you review, the display shows the name for about 4

seconds, then the name is replaced by the call date and time (for

about 4 seconds). The number display appears for about 5 seconds,

then the display returns to the date and time display (unless you

press

REVIEW6

After you review all calls,

END

LIST

appears. Press

RE-

VIEW

to view the calls again.

Viewing Call Information

The caller ID displays the following information.

DELETING CALLS

Deleting a Single Call

1. Repeatedly press

REVIEW6

until you see the call record

you want to delete.

2. Press

DELETE

DELETE?

appears.

3. Press

DELETE

again. The system deletes that record and auto-

matically renumbers the remaining call records.

Or, to cancel deletion, do not press any button. After about 5

seconds, the time and date reappear.

Deleting All Calls

1. Press either

REVIEW6

2. Hold down

DELETE

until

DELETE

ALL?

appears.

3. When

DELETE

ALL?

appears, press

DELETE

again.

CALL

appears.

Or, to cancel deletion, do not press any button. After about 8

seconds,

DELETE

ALL?

disappears.

Inch

Display Description

NEW

Appears during an incoming

call and flashes when there

is a new call that has not

been reviewed.

REPT

Appears if you have

received the same phone

number more than once.

Number of call records, or

number of new calls that

have not been reviewed, or

sequence number during

review.

MESSAGE

WAITING

A message is waiting.

LONG DISTANCE

The call is long distance.

PRIVATE

The caller blocked the name

and number information.

OUT OF AREA

The caller is not within a

Caller ID service area that

provides the name or

number.

CALL FORWARD

The call was forwarded from

a number set to forward all

calls.

ERROR

Call information was

distorted before reaching

the system.

NO DATA SENT

Call information was not

sent by the phone company.

CALL FWD BUSY

The call was forwarded from

a number set to forward a

call if the line is busy.

CALL FWD NO

ANS

The call was forward from a

number set to forward a call

if no one answered.

1 2 3 4

Comments to this Manuals

No comments

Radio Shack Caller Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for Telephones Radio Shack Caller