Radio Shack Digital Spread Spectrum Cordless Telephone with Digital Answering System Owner's Manual

Owner’s ManualPlease read before using this equipment.900 MHz Digital Spread Spectrum Cordless Telephone

10Operationbatteries at the end of their useful life, whentaken out of service in the United States orCanada. The RBRC program provides a con-venient

11OperationNote: If the handset is too far from the base,the channel might not be clear. Move closerto the base and try making the call again.SETTING

12OperationUSING THE PHONE COMPANY’S SPECIAL SERVICESYour phone supports advanced calling ser-vices provided by many phone companies,such as Return Ca

13OperationResetting to the Factory SettingTo restore a service dial button to its factorydefault, lift the handset and press MEM twicethen press the

14TroubleshootingChain-Dialing Service NumbersFor quick recall of numbers for special ser-vices (such as alternate long distance orbank-by-phone), sto

15TroubleshootingIf you still have problems, disconnect the phone. If other phones on the same line work proper-ly, the fault is in this phone or its

43-5518UCZZ01696BZ06A00Printed in ChinaRadioShack CorporationFort Worth, Texas 76102Limited One-Year WarrantyThis product is warranted by RadioShack a

2ˆContentsFeatures ...

3READ THIS BEFORE INSTALLATION We have designed your phone to conform tofederal regulations and you can connect it tomost phone lines. However, each d

4• moving your phone away from thereceiver• connecting your phone to an AC outletthat is on a different electrical circuitfrom the receiver• contactin

5of the type of power supply to yourhome, consult your local power com-pany.13. Do not allow anything to rest on thepower cord. Do not locate this pro

6FeaturesSAVE THESE INSTRUCTIONSˆFeaturesYour Sprint 900 MHz Digital Spread Spec-trum Cordless Telephone uses advancedcordless telephone technology to

7InstallationˆInstallationMOUNTING THE PHONEYou can place the phone’s base on a desktop or table, or mount it on a wall. Select a lo-cation that is:•

8Installation3. Insert the supplied AC adapter’s barrelplug into the DC IN 9V jack as in “On aDesk Top,” Step 3.4. Route the adapter and modular cords

9Installation3. Put the battery pack in the compartment. 4. Replace the cover.To charge the battery pack, simply place thehandset on the base, either