Radio Shack PRO-91 User Manual download pdf (Page 29)

When the scanner stops on a transmission, quickly

press either:

•

HOLD

to stop searching so you can listen to the

transmission.

HOLD

appears.

•

MON/CLEAR

to store the displayed frequency into

the current monitor memory.

To release hold and continue searching, press

HOLD

or hold down

t or s for at least 1 second. Or,

if you did not press

HOLD

, simply press t or s to

continue searching.

Note:

Because there are many different frequencies al-

located to fire and police departments, it takes several

minutes to search all these frequencies.

Search Skip Memory

You can skip up to 20 specified frequencies during a

limit or direct search and up to 20 specified frequencies

during a service bank search. This lets you avoid un-

wanted frequencies or ones you have already stored in

a channel.

To skip a frequency, press

S/S

when the scanner

stops on the frequency dur-

ing a limit, direct, or service

search. The scanner stores

the frequency in memory

and automatically re-

sumes the search.

To clear a single frequency from skip memory so the

scanner once again stops on it during a limit, direct, or

service bank search:

1. Press

HOLD

to hold the search.

2. Press t or s to select the frequency.

L/O

ap-pears.

3. Press

S/S

L/O

disappears.

To clear all the skip frequencies at once while search-

ing, press

HOLD

, then hold down

S/S

until the scanner

beeps twice (about 3 seconds).

20-521.fm Page 29 Wednesday, August 4, 1999 3:32 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Comments to this Manuals

No comments

Radio Shack PRO-91 User Manual Page 29

Comments to this Manuals

Related products and manuals for Two-way radios Radio Shack PRO-91