Radio Shack FX2 Installation Guide download pdf (Page 10)

(Revised 8/4/2009)

Front Pannel

From Left to Right:

LNK Link LED for Fiber Optic Port (only FX/FXE models)

TX 100MB/s Fiber Optic TX Port (only FX/FXE models)

RX 100MB/s Fiber Optic RX Port (only FX/FXE models)

ACT Activity LED for Fiber Optic Port (only FX/FXE models)

RJ45 Ports Auto sensing 10/100 BaseTX Connections

Green LED lights when Power is connected

NOTE: Each RJ45 data port has two LED’s located at the top or bottom of each connector. The left LED

indicates LINK status (green for 100Mb link, Orange for 10Mb link), and the right LED indicates

ACTIVITY (Green for Full Duplex activity, Orange for Half Duplex Activity).

LED’s: The table below describes the operating modes:

LED

Color

Description

GREEN Power is Applied

OFF Power is OFF

LNK

GREEN 100Mb Link between ports

ORANGE 10 Mb Link between ports

OFF No Link between ports

ACT

GREEN Data is active between ports

and operating in full duplex

ORANGE Data is active between ports

and operating in half duplex

OFF Data is inactive between

ports

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

No comments

Radio Shack FX2 Installation Guide Page 10