Radio-shack 64 User Manual download pdf (Page 21)

21

OPERATION

WATCHING TV

Using the TV’s Tuner

To watch a broadcast using the TV’s tuner, turn

off the VCR or repeatedly press

TV/VCR

until

VCR disappears from the VCR’s display.

Note:

If you are using a TV/monitor connected

to the VCR’s

R-AUDIO-L/VIDEO OUT

jacks, be

sure to set the TV/monitor to its TV mode.

The antenna or cable signals pass through the

VCR unaffected, as if the antenna or cable

were connected directly to the TV. Use the TV

as you normally would.

Using the VCR’s Tuner

Your VCR can receive up to 68 VHF and UHF

channels, and up to 125 cable channels. The

VCR displays the channels as 1–125.

Notes:

• Channels 2–13 are the same for VHF and

cable TV, and cable companies usually

number them as they appear on the dis-

play.

• Since cable companies sometimes desig-

nate cable channels with letters or letter-

number combinations, a channel number

you see on the VCR’s display might differ

from the channel number displayed on

your cable box. You might need to experi-

ment to determine the proper cable chan-

nel designations for your cable system. For

more information, contact your local cable

company.

• Two of the cable channels are designated

for audio only.

1. Turn on the TV and set it to the same chan-

nel as the VCR’s

3-CH-4

switch.

Note:

If you are using a TV/monitor con-

nected to the VCR’s

R-AUDIO-L/VIDEO OUT

jacks, set the TV/monitor to its video mode.

2. Repeatedly press

TV/VCR

until VCR

appears.

3. To manually select a channel, you can

press

CH

s or

CH

t to have the tuner auto-

matically advance to the next channel

stored in the tuner’s memory.

Note:

If you press

CH

s when the tuner is

at the highest programmed channel or

CH

t

when the tuner is at the lowest pro-

grammed channel, the VCR enters the

audio/video mode and

LINE

1

or

LINE

2

appears on the TV (see “Selecting the Sig-

nal to Record” on Page 34). Continue to

press

CH

s or t until the highest or lowest

programmed channel appears.

Or, to directly select a channel, press the

number buttons on the remote control for

the desired channel.

Notes:

• Precede a single-digit number with a 0

— for example, 01, 02, and so on.

• To enter a three-digit number, press

100

,

then enter the second and third digits in

the channel number.

• If you receive MTS stereo or SAP broad-

casts, see “Receiving/Recording Stereo/

SAP Broadcasts” on Page 34.

Channel Caption

You can assign call letters (such as ABC or

CBS) to a channel so the call letters appear

with the channel number on the TV when you

select the channel. You can select from the

VCR’s 24 preset call letter combinations and

create up to 10 call letter combinations of your

own.

16-634.fm Page 21 Tuesday, July 20, 1999 5:37 PM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Comments to this Manuals

No comments