Radio Shack 65-789 Owner's Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
3
Preparation
Preparation
CONNECTING POWER
You can power your calculator with either
four AA batteries (not supplied) or an exter-
nal AC adapter (not supplied). If you plan to
use the print function frequently, we suggest
you use an AC adapter.
Installin
g
Batteries
To run on internal battery power, the calcula-
tor requires four AA batteries. For the longest
life, we recommend RadioShack alkaline
batteries.
1. Slide the battery compartment cover off
in the direction of the arrow.
2. Put the batteries in the compartment as
indicated by the polarity symbols (+ and
–) marked inside.
Caution:
Use only fresh batteries of the
required size and type. Do not mix old
and new batteries, different types of bat-
teries (standard, alkaline, or recharge-
able), or rechargeable batteries of
different capacities.
3. Replace the cover.
If the calculator's display dims or the calcula-
tor does not function properly, replace the
batteries.
Caution:
Dispose of old batteries promptly
and properly. Do not burn or bury them. If
you do not plan to use the calculator with
batteries for a a week or more, remove the
batteries. Batteries can leak chemicals that
can destroy electronic parts.
Connectin
g
an AC Adapter
You can power your calculator from standard
AC power, using an optional 6V DC 400 mA
AC adapter.
Cautions:
Use only an AC adapter that supplies
regulated 6 volts and delivers at least
400 mA. Its barrel plug must correctly fit
the calculator’s jack and its center tip
must be set to negative. The recom-
mended adapter meets those specifica-
tions. Using an adapter that does not
meet these specifications could damage
the calculator or the adapter.
Always plug the AC adapter into the cal-
culator before you plug it into the AC
outlet. Always unplug the AC adapter
from the outlet before you unplug it from
the calculator.
1. Set
OFF/ON
to
OFF
.
2. Insert the barrel plug into the jack on the
back of the calculator.
3. Plug the adapter's module into an AC
outlet.
Note:
Internal batteries (if installed)
automatically disconnect when you plug
an AC adapter into the calculator.
INSTALLING THE PAPER
ROLL
AC Jack
Paper Slot
Paper Roll
Holder
Page view 3
1 2 3 4 5 6 7 8 9 ... 12 13

Comments to this Manuals

No comments