Radio Shack 32-2058 User's Guide

Please read this user’s guide before installing, setting up and using your new productwww.radioshack.commixer user’s guide

10The Basicspresetting audio inputs Before mixing your audio sources (devices connected to LINE 1, PHONO 1, PHONO 2, LINE 2, LINE 3, LINE 4, LINE 5, L

11The Basics5. Slowly slide up the channel volume control (CH) until you get a reading of up to 0 dB on both LED meters. 6. Stop playback of the sel

12The Basics2. While talking, adjust DJ MIC LEVEL or AUX LEVEL until you get a reading of less than 0 dB on both LED meters. See “using an XLR microp

13Beyond the Basicsmixing inputs You can select any two of your connected audio sources and mix them so one or both play through your sound system. Mi

14Beyond the Basicsmonitoring a second input source Monitoring a second input source requires listening to an input source, finding the desired audio s

15Beyond the Basicsusing a microphone using an XLR microphone To mix the XLR microphone with other audio input sources, adjust DJ MIC LEVEL to increas

16Beyond the Basicsusing the special controls tone Your mixer has a set of tone controls for each microphone and channels 1– 4. You can tailor the hig

17Beyond the Basicssetting the sound balance BALANCE lets you adjust the sound balance between the left and right speakers. If your speakers are prope

18Beyond the Basicsusing echo The mixer plays echo effects, and lets you adjust echo delay, number of echo repeats, and the echo’s volume. The echo is

19Beyond the Basicsplaying input signals through the sound effect device You can play inputs selected by the channel selectors (DJ MIC or AUX) throug

2The Basicscontentsconnections ... 6using your mixer ... 9mixing input

20Beyond the Basicsfrequently asked questions Q - I set up my mixer using the instructions. Why doesn’t it work?A - Make sure you are connected to

21Beyond the Basicsreplacing the fuse The mixer uses a fuse for protection against surges and short circuits. If the mixer suddenly turns off and will

22Beyond the BasicsSpecificationsInput Sensitivity/Impedance DJ MIC (XLR jack) ... 1.5mV, 600 ohms, balanced/unbalanced AUX MIC (Phone jack

23Beyond the Basics

©2004. RadioShack Corporation. All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.Printed in China 32-20

3The BasicsIMPORTANT SAFETY INSTRUCTIONSRead Instructions — All safety and operating instructions should be read before the appliance is operated.Reta

4The Basicstry reversing the plug. If the plug still doesn’t fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety pu

5The Basics* When the power-supply cord or plug is damaged.* If liquid has been spilled or objects have fallen into the appliance.* If the appliance h

6The BasicsconnectionsA sudden high output from the mixer could damage your hearing or damage the audio devices connected to your mixer. Before connec

7The Basicsconnecting inputs LINE 1, 2, 3, 4, 5, 6 — connect up to six audio sources to your mixer. Do not connect audio sources with line-level outpu

8The Basicsconnecting a lamp, headphones and mic listening safely Do not listen at extremely high volume levels. Extended, high-volume listening can

9The Basicsusing your mixer 1. Set your output device’s volume to minimum and turn it on. 2. Press POWER to turn on the mixer. 3. Turn on the audio