Radio Shack 7-in-1 Remote Control with Lighted Keypad Owner's Manual download pdf (Page 16)

Need help? Call

1-800-989-4706

9. To brighten or dim lights connected to lamp

and appliance modules, press the digit key

for the module you want to control. Then

hold down

VOLUME + (Brt)

VOLUME –

(Dim)

on the 7-in-1. Release the key when

the desired level of brightness is reached.

Note:

You must select the individual light to

brighten or dim even if you used

POWER (All

Lts On)

on the 7-in-1 to turn on all the lights

at the same time.

Setting a Plug

’

n Power Timer

You can set the 7-in-1 Remote Control to turn on

or off a lamp/appliance module you select or turn

off all modules after a period of 1 to 99 minutes.

This works with an optional IR command console

or Plug ’n Power Wireless Remote Control Sys-

tem.

Note:

When you use the 7-in-1 to control all mod-

ules at one time, the only command that works is

All Off

1. Press

Plu

’n Power

on the 7-in-1.

2. Hold down

TIMER

on the 7-in-1 until the red

light above stays on.

Note:

Skip Step 3 if you are turning all mod-

ules off using the

All Off

command.

3. To turn on or off a specific module using the

7-in-1 Remote Control, press the digit keys

to enter the module’s device code. The red

light blinks once.

4. Press

(

CHANNEL + (On)

(to set a module

to turn on),

Off

(

CHANNEL – (Off)

(to set a

module to turn off), or

MUTE (All Off)

(to set

all modules to turn off.

When the red light blinks once, the 7-in-1

has accepted the code.

15-1924.fm Page 16 Monday, July 19, 1999 12:50 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Comments to this Manuals

No comments

Radio Shack 7-in-1 Remote Control with Lighted Keypad Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for Other input devices Radio Shack 7-in-1 Remote Control with Lighted Keypad