Radio-shack 900 MHz User Manual download pdf (Page 8)

8

Installation

with local codes for possible special

disposal instructions.

3. Do not open or mutilate the battery

pack. Released electrolyte is corro-

sive and may cause damage to the

eyes or skin. It may be toxic if swal-

lowed.

4. Exercise care in handling the battery

pack in order not to short it with con-

ducting materials such as rings,

bracelets, and keys. The battery or

conductor may overheat and cause

burns.

5. Charge the battery pack provided

with or identified for use with this

product only in accordance with the

instructions and limitations speci-

fied in the instruction manual pro-

vided for this product.

6. Observe proper polarity orientation

between the battery pack and bat-

tery charger.

SAVE THESE INSTRUCTIONS

ˆ

Installation

MOUNTING THE PHONE

You can place the answering system’s base

on a desk or table, or mount it on a standard

wall plate or directly on a wall. Choose a lo-

cation that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery, electri-

cal appliances, metal walls or filing cabi-

nets, wireless intercoms, alarms, and

room monitors

• away from other cordless phones

The base’s location affects the phone’s

range. If you have a choice of several loca-

tions, try each to see which provides the best

performance.

Cautions:

You must use a power source

that supplies 9V DC and deliv-

ers at least 350 mA. Its center

tip must be set to positive and its plug

must fit the phone's

DC IN 9V

jack. The

supplied adapter meets these specifica-

tions. Using an adapter that does not

meet these specifications could damage

the phone or the adapter.

• Always connect the AC adapter to the

phone before you connect it to AC

power. When you finish, disconnect the

adapter from AC power before you dis-

connect it from the phone.

Notes:

• Your telephone connects directly to a

modular telephone line jack. If your

phone line jack is not a modular jack,

you can update the wiring yourself,

using jacks and adapters, available at

your local RadioShack store. Or, you

can let the phone company update the

wiring for you.

!

43-749.fm Page 8 Tuesday, September 5, 2000 11:24 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments