Radio Shack 14-518 Owner's Manual download pdf (Page 7)

7

CD Player Operation

USING REPEAT PLAY

The system lets you continuously repeat a

single track, all tracks on a CD, or an entire

programmed sequence of tracks.

To continuously repeat a single track, press

REPEAT

once so the repeat indicator in front

of the right digit of the track number flashes.

To continuously repeat all tracks on the CD,

press

REPEAT

twice so the repeat indicator in

front of the track number lights.

To continuously repeat an entire pro-

grammed sequence, first program the tracks

you want to play (see “Programming

Tracks”), press then

REPEAT

twice, so

the repeat indicator lights.

To cancel repeat play during play, repeatedly

press

REPEAT

until the indicator turns off.

The CD player resumes normal play.

The repeat indicator remains lit after is

pressed. To cancel repeat play when the CD

is stopped, press .again or

REPEAT

once.

PROGRAMMING TRACKS

You can program the system to play up to 16

tracks in any order you choose, and you can

program the same track to play more than

once.

Storing/Playing a Programmed

Sequence

1. With a CD loaded but not playing, press

PROGRAM

.

Pr

flashes on the display

and the

FM ST./PROG indicator flashes.

2. Repeatedly press

SKIP

.or

SKIP

until the desired track number

appears.

3. To store the selected track, press

PRO-

GRAM

.

Pr

flashes on the display and

the

FM ST./PROG indicator flashes.

4. Repeat Steps 2–3 to store up to 16

tracks.

Note:

If you try to store more than 16

tracks, the 17th track is not stored and

Pr

flashes on the display.

5. Press . to play the programmed

tracks. The first programmed track num-

ber appears and the play/pause indica-

tor and the FM ST./PROG indicator

lights. The CD begins to play starting

with the first programmed track.

Reviewing a Programmed

Sequence

To review a programmed sequence, with

play stopped, press

PROGRAM

once (if you

have stored all the tracks in the sequence).

Otherwise, press

PROGRAM

twice. The FM

ST./PROG indicator flashes and the track

number of each stored track appears.

Erasing a Programmed Sequence

You can do any of the following to erase a

programmed sequence:

•Set

FUNCTION

to

STD BY.TAPE

or

RADIO

.

• Open the CD door with play stopped.

• Press with play stopped.

CD AND CD PLAYER TIPS

Even though a compact disc is durable, treat

the CD surface with care.

• Do not write on either side of the CD,

particularly the non-label side. Signals

are read from the non-label side.

• Do not store CDs in high temperature,

high-humidity locations. They might

warp.

• Keep CDs dry. A water drop can act as a

lens and affect the laser beam’s focus.

14-518.fm Page 7 Tuesday, October 10, 2000 11:31 AM

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments