Radio Shack 3-DVD Changer Specifications download pdf (Page 10)

CONNECTING ANTENNAS

FM Indoor Antenna

In an area with strong FM signals, the T-type FM antenna

(supplied) is sufficient.

1. Use a flat or Phillips screwdriver to loosen the screws on

the supplied transformer.

2. Place the metal connectors on the end of the T-type

antenna’s base on the transformer’s metal contacts

(underneath the screw heads) then tighten the screws.

3. Plug the transformer into

ANTENNA FM

Ω.

4. Extend the T-antenna’s other two wires and attach them to

a wall or window frame for the best possible reception.

: If you have an FM antenna that uses coaxial cable,

connect it directly to

ANTENNA FM

Ω.

FM Outdoor Antenna

In an area where FM signals are weak, you must use a 75-ohm

unbalanced-type outdoor FM antenna (not supplied).

Generally, a 3-element antenna will be sufficient. If you live in

an area where the FM signals are particularly weak, it may be

necessary to use one with 5 or more elements.

If you have an FM antenna that uses coaxial cable, connect it

directly to

ANTENNA FM

Ω.

If you have a twin-lead FM antenna, connect it to the supplied

transformer, then plug the transformer into

ANTENNA FM

Ω.

(see Steps 1–3 of “FM Indoor Antenna”).

AM Indoor Loop Antenna

The supplied high-performance AM loop antenna is sufficient

for good reception in most areas.

Connect the loop antenna’s wires to

and

GND

. Place the

antenna in a location (for example, on a shelf or window

frame) that gives the best reception.

Keep the antenna as far away as possible from the entire

system, speaker cords and the power cord to prevent

unwanted noise.

AM Outdoor Antenna

If the supplied AM loop antenna does not deliver sufficient

reception, use an outdoor AM antenna (not supplied).

Use an insulated wire more than 15 feet (5 m) long. Strip one

end, and connect that end to

String the antenna wire outdoors or indoors near a window.

For better reception, connect the

GND

terminal to a reliable

ground.

OPERATION

A QUICK LOOK AT THE DISPLAY

Sound Mode indicators —

(see

“Changing the Sound Mode” on

Page 14

)

Number & Data Readout —

Area

where information is displayed in

digital format

Memory Preset

Indicators —

(see

“Presetting Radio

Stations” on

Page 19)

Sound Transmission Format—

PCM

is displayed. When the system is set

to Bitstream this indicator is blank

(see “Selecting Digital Audio Out” on

Page 18).

Disc Mode Indicators —

Shows which

disc and what type of disc is playing.

Shows the play mode, such as random

or repeat.

Program Indicator

Title Indicator

Track Indicator

Tape Monitor

Tuner Indicators —

(see “Using the Tuner”

on Page 19)

Chapter Indicator

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

Radio Shack 3-DVD Changer Specifications Page 10

Comments to this Manuals

Related products and manuals for CD players Radio Shack 3-DVD Changer