Radio Shack 3-DVD Changer Specifications download pdf (Page 7)

PLACING THE RECEIVER

Do not place objects directly on top of the receiver as it could

prevent proper heat dispersal.

When installing in a rack or shelf, be sure to leave an adequate

amount of space above and behind the receiver for air

circulation.

PLACING THE SPEAKERS

1. Place the front left and right speakers at equal distances

from the TV.

2. Install the center speaker above or below the TV so the

center channel’s sound is localized at the TV screen.

: If you choose to install the center speaker on top

of the TV, be sure to secure it to reduce the risk of damage

or injury resulting from the speaker falling from the TV in

the event of external shocks (for example, earthquakes).

3. Install the surround speakers slightly above ear level.

: Try not to install the surround speakers farther away

from the listening position than the front and center

speakers. Doing so can weaken the surround effect.

4. Place the subwoofer on the floor near the TV.

: Be sure all speakers are installed securely to prevent

accidents and improve sound quality.

CONNECTING THE SPEAKERS

: When connecting equipment, always make sure the

power is switched off and the power cord is disconnected from

the AC outlet.

• Use speakers with a nominal impedance of 6 Ohms or

more.

• Be careful not to bend cables over the top of the receiver. If

cables are placed on top of the receiver, the magnetic field

produced by the receiver’s transformers can cause the

speakers to produce a humming noise.

1. Press the speaker’s terminal up (or down) and insert the

appropriate wire ends. The color of the speaker wire’s

plastic coating matches the corresponding terminal.

: Be sure to connect each speaker to the appropriate

speaker terminal, connecting positive to positive (+ to +)

and negative to negative (– to –).

2. Connect the front speakers’ wires to the receiver’s

SPEAKERS FRONT L

and

terminals (Red/Black).

Connect the surround speakers’ wires to the receiver’s

SPEAKERS SURROUND L

and

terminals (Gray/Black).

Connect the center speaker’s wires to the receiver’s

SPEAKERS CENTER

terminals (Blue/Black).

Connect the subwoofer’s wires to the receiver’s

SPEAKERS

SUB WOOFER

terminals (Brown/Black).

3. Release the speaker terminal.

4. Plug the AC power cord into an AC outlet.

Connecting a Second Subwoofer

You can connect a second or larger powered subwoofer to the

system. Connect the sub woofer to the receiver’s

SUB WOOFER

PRE-OUT

jack using shielded audio cable (not supplied).

CONNECTING HEADPHONES

You may connect a conventional dynamic headphone with a

Inch plug to the

PHONES

jack on the front of the receiver.

When you connect headphones, the receiver automatically

selects stereo mode.

: When you connect headphones, the sound from the

speakers is automatically muted. When you remove the

headphones, the speakers’ volume is restored.

CONNECTING COMPONENTS

: When connecting equipment, always make sure the

power is switched off and the power cord is disconnected from

the AC outlet.

You must connect a TV to the receiver in order to use the

receiver’s DVD player to watch DVDs. You can also connect

other audio and audio/visual components to the receiver in

order to fully utilize the Home Theater Audio System’s

surround sound capabilities.

: The system comes with one set of audio/video cables.

Your local RadioShack store sells a wide variety of audio/video

cables if you need cables to connect more components.

SPEAKER TERMINALS

CONNECTION BLOCK

COMPONENT CONNECTIONS BLOCK

ANTENNA CONNECTIONS

DIGITAL (OPTICAL)

CONNECTIONS

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments

Radio Shack 3-DVD Changer Specifications Page 7

Comments to this Manuals

Related products and manuals for CD players Radio Shack 3-DVD Changer