Radio Shack 360 Owner's Manual download pdf (Page 12)

Operation

You must calibrate the detector when:

• It is being used for the first time.

• It is moved to a different location within the vehicle, or if it is

removed and placed in another vehicle.

•

DISTORT

appears.

Note:

You must complete the circles in less than 2 minutes.

Otherwise, begin again from step1.

Follow these steps to calibrate your detector.

1. Hold down

CITY

for about 2 seconds until

CAL....

appears.

TURN

and

TWICE

flash alternately.

2. Turn the steering wheel all the way to the right or left and

drive in two complete circles. Then press

CITY

WAIT

flashes four times.

3. If the calibration is complete,

SUCCESS!

appears. If cali-

bration is not, the display scrolls

PLEASE

CALIBRATE

AGAIN...

PRESS

CITY-KEY

. Repeat steps 1 and 2.

After calibration, the compass heading appears.



Operation

TURNING ON THE DETECTOR

To turn on the detector, rotate

VOLUME/OFF

toward

VOLUME

until it clicks. A tone sounds and

WELCOME

appears. After self-

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

Radio Shack 360 Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Radar detectors Radio Shack 360