Radio Shack 360 Owner's Manual download pdf (Page 15)

Operation

Muting the Audio Alert

When the detector sounds a radar or safety alert signal, press

MUTE

to temporarily silence the detector. When you press

MUTE

appears. The detector resets

MUTE

to go off 20 sec-

onds after the signal stops. Or, press

MUTE

again before it re-

sets, and

disappears. The laser alert signal remains audible

even if you press

MUTE

Selecting VG-2 Mode

VG-2 mode is preset to off. To turn on VG-2, hold down

MUTE

until

VG2-ON

appears. To turn VG-2 off, hold down

MUTE

until

VG2-OFF

appears.

Note:

If there is another detector nearby, you might receive

false signals. To avoid receiving such signals, turn VG-2 off.

RECEIVING AND IDENTIFYING RADAR,

LASER, AND SAFETY ALERT SIGNALS

When your detector senses a radar signal,

, or

appears.

An alert tone for the type of band detected sounds, and the dis-

play shows the signal strength in numeric form.

Note:

The closer you get to the source of the radar, the higher

the signal strength number.

When your detector senses an instant-on signal,

INSTANT

appears and the instant-on alert tone sounds.

When your detector senses a laser signal,

LASER

flashes and

the laser alert tone sounds.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments

Radio Shack 360 Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for Radar detectors Radio Shack 360