Owner’s ManualPlease read before using this equipment.XL-110 High Power Stereo Amplifier12-2014.fm Page 1 Tuesday, May 9, 2000 8:51 AM
10Connecting InputsFour Speaker OutputsFloating Ground ConnectionCommon Ground ConnectionAuto Sound SystemLeft Rear + SpeakerLeft Rear – SpeakerRight
11Connecting InputsTwo Speaker OutputsFloating Ground ConnectionCommon Ground ConnectionAuto Sound SystemLeft + SpeakerLeft – SpeakerRight + SpeakerRi
12Connecting InputsCONNECTING SPEAKERSYou can connect two speakers or a subwoof-er to the amplifier and your auto sound sys-tem.• If you are connectin
13Connecting InputsConnecting Two Speakers1. Use a screwdriver to connect the left speaker’s positive (+) wire to the amplifier’sSPEAKER L (+) termina
14Completing the Installation2. Use a screwdriver to connect the sub-woofer’s negative (–) wire to the ampli-fier’s negative (–) terminal for the same
15OperationNote: If you have not already done so,be sure to mark each wire with the nameof the terminal you will reconnect it to.3. Using the mounting
16Troubleshooting4. Turn up the auto sound system’s volumecontrol until the sound begins to distort.Then immediately turn the volume downto a point ju
17TroubleshootingIf you still have problems, disconnect the amplifier and take it to your local RadioShack storefor assistance.No Sound (continued). T
18CareˆCareTo enjoy your amplifier for a long time:• Keep the amplifier dry. If it gets wet,wipe it dry immediately.• Use and store the amplifier only
19SpecificationsˆSpecificationsOutput Power @ 14.4 VDC 1kHz ... 35 Watts × 2 @ 4 Ohms, 20–20 kHz, 0.5% THD55 Watts
2ˆContentsFeatures ...
12-201405A00Printed in ChinaRadioShackA Division of Tandy CorporationFort Worth, Texas 76102Limited One-Year WarrantyThis product is warranted by Radi
3FeaturesˆFeaturesYour RadioShack High-Power Stereo Amplifi-er produces a total of 110 watts to give add-ed punch and power to your vehicle’sexisting
4PreparationˆPreparationSUPPLIED HARDWAREYour amplifier comes with the following items. Be sure you locate everything listed before youstore or dispos
5PreparationWarning: The amplifier gets very hot while itis on. Do not touch the amplifier or placeflammable objects near it while it is on.Preparing
6PreparationCautions:• For added safety and to protect youramplifier and auto sound system, dis-connect the cable from your vehicle’snegative (–) batt
7Preparationusing one of the supplied twist-on termi-nal connectors.This connection turns on the amplifierwhen you turn on the auto sound sys-tem, and
8Connecting InputsˆConnecting InputsLOW-LEVEL INPUTSYou can connect your auto sound system’s low-level line out jacks to the amplifier’s low-levelline
9Connecting InputsHIGH-LEVEL (SPEAKER WIRE) INPUTSIf your auto sound system does not havelow-level line out jacks but has only speakeroutputs, connect
Comments to this Manuals