Radio Shack 7-in-One RF Owner's Manual download pdf (Page 46)

Need help? Call

1-800-763-9232

in-One’s memory. It does

not

erase the setup codes you

programmed.

To reset the 7-in-One using the Clear All feature:

1. Hold down

SETUP

. TIMED SEQ appears.

2. Press

twice. CONFIGURE appears.

3. Press

SELECT

. THEATER SEL appears.

4. Press

. CLR ALL appears.

5. Press

SELECT

. CLR ALL appears.

6. Press

SELECT

again. CONFIRM appears.

7. Press

SELECT

once more. Your 7-in-One is reset.

USING THE IR/RF COMMAND

CENTER

The 7-in-One comes with an IR/RF Command Center

which receives radio frequency (RF) signals from the 7-

in-One and converts them into infrared (IR) signals to

control your components.

Note:

The 7-in-One’s actual range depends on the con-

struction of the building where it is used, as well as other

factors, such as radio frequency interference. For the

best operation:

• Aim the 7-in-One toward the room where the Com-

mand Center is located.

• Do not position the Command Center near metal

objects (such as heating ducts) that can absorb RF

signals.

• Keep fresh batteries in the 7-in-One. Weak batter-

ies reduce the 7-in-One’s range.

15-1935.fm Page 46 Thursday, December 31, 1998 11:37 AM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Radio Shack 7-in-One RF Owner's Manual Page 46

Comments to this Manuals

Related products and manuals for Remote controls Radio Shack 7-in-One RF