Need help? Call
1-800-763-9232
5
• To extend battery life, the display turns off after 10
seconds of keypad inactivity and turns on again
when you press any key.
• Device codes you have programmed into the 7-in-
One remain stored in memory while you replace
the batteries. However, you must reset the clock.
SETTING THE CLOCK
Follow these steps to set the clock on the 7-in-One’s dis-
play.
1. Hold down
SETUP
until TIMED SEQ. appears.
2. Press
MENU
twice. CONFIGURE appears.
3. Press
SELECT
. THEATR SEL appears.
4. Press
MENU
again.
5. Press
SELECT
. TIME appears and the first digit in
the time flashes. Enter the time in 12-hour format.
AM/PM flashes.
6. If necessary, press
MENU
to toggle between AM
and PM, then press
SELECT
. The day of the week
display appears.
7. Use
MENU
and to toggle through the days of
the week until the current day appears, then press
SELECT
. The currently selected device and the cor-
rect time appear.
15-1935.fm Page 5 Thursday, December 31, 1998 11:37 AM
Comments to this Manuals