Radio Shack ET-1118 Owner's Manual download pdf (Page 4)

plugged in to maintain the Caller ID and speed dialing

memories.

If you do not replace the batteries promptly, your Caller ID

and telephone memory information may be lost.

Rý

5'.'%6+0)"#".1%#6+10

Select a location for your telephone that is:

• Near a telephone jack

• Not in the way of normal activities in the area

Your telephone connects directly to a modular telephone

line jack. If your telephone wiring does not have a modular

jack, you can update the wiring yourself using jacks and

adapters (available at your local RadioShack store), or have

the telephone company update the wiring for you. You must

use compatible modular jacks that are compliant with Part

68 of FCC Rules.

/1706+0)"6*' "2*10'

You can mount your telephone on a wall plate, directly on a

wall, or place it on a shelf, desk or table.

1P"C"&GUMVQR

1. Plug one end of the supplied long modular cord into the

LINE

jack at the back of the base.

2. Plug the cord’s other end into a modular phone line

jack.

3. Place the phone on a shelf, desk, or table near enough

to the modular phone line jack so that there is no strain

on the cord.

1P"C"9CNN"2NCVG"QT"9CNN

1. Press and lift out the handset holder. Rotate it 180°,

and snap it into place so it will hold the handset in place

when the phone is mounted on the wall.

2. Insert the mounting bracket’s two tabs into the

matching slots opposite the keyhole slot on the

underside phone’s base. Then press down and slide

the bracket upward until the tabs snap into place.

3. Plug one end of the supplied short modular cord into

the

LINE

jack at the back of the base.

"9#40+0)

Dispose of old batteries promptly

and properly. Do not burn or bury

them.

"016'"

The USOC number of the jack to

be installed is RJ11C (or RJ 11W

for a wall plate jack).

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Radio Shack ET-1118 Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Telephones Radio Shack ET-1118