Radio Shack 200 User's Guide download pdf (Page 25)

Settings

Setting Delay

Sometimes a user might pause before replying

to a transmission. To avoid missing a reply on

a speciﬁc channel, the scanner automatically

programs a 2-second delay into any channel or

frequency.

Depending on the scanner operation, follow one

of these steps to turn the delay on or off.

• To turn off the 2-second delay, press

•/DELAY while the scanner is monitoring

a channel, scanning, or searching.

DLY

disappears.

• To turn on the 2-second delay for a single

channel, manually select the channel and

press •/DELAY.

DLY

appears.

• To turn on the 2-second delay for the search

function, press •/DELAY while the scanner

is searching.

DLY

appears and the scanner

automatically adds a 2-second delay to

every frequency it stops on in that band.

The Signal Stalker I delay time is 10 seconds.

Turning Channel-Storage Banks On or Off

You can turn each channel-storage bank on and

off. When you turn off a bank, the scanner does

not scan any of the 20 channels in that bank.

While scanning, press the number key that

corresponds to the bank you want to turn on or

off. The scanner scans all the channels within the

displayed banks that are not locked out.

Notes:

• You can manually select any channel within a

bank, even if that bank is turned off.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

No comments

Radio Shack 200 User's Guide Page 25