Radio Shack 200 User's Guide download pdf (Page 30)

Advanced Programming

Transferring Data To or From another

Scanner

You can clone your scanner by transferring the

programmed data to or from another PRO-135

scanner using a connecting cable. You can also

upload or download programmed data from a PC

through wired programming.

Cloning Your Scanner

You can clone all the frequencies

in your PRO-135 to another PRO-

135 or PRO-136 using an optional

interface cable with 1/8-inch phone

plugs on both ends and software

available at your local RadioShack

or www.radioshack.com.

1. Make sure the scanners are

turned off and then plug the

cable into each scanner’s

PC/IF jack.

2. Turn on both scanners.

WirEd

and

PGM

appear.

3. Press T or S on the scanner

from which you want to send frequencies. This

is the “master unit.” The receiving scanner is

the “slave unit.”

4. Press ENT/PGM on the master unit to send

the data.

SEnd

and the transfer progress are

displayed in the master unit.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Radio Shack 200 User's Guide Page 30