Radio Shack 65-779 Specifications download pdf (Page 32)

afterward, the PDPS will automatically replace the Surface mode and sequen-

tially show depths from 30 to 160 feet (9 to 48 m) in 10 foot (3 m) increments,

which takes about 42 seconds. With each depth display you will see 'predicted'

no decompression limits based upon your previous dive profiles.

The Data100 will then return to the Surface mode for approximately 18 seconds

before repeating the PDPS, continuing between the two modes for the first 12

hours after surfacing. The no decompression limits for a “clean” dive (no dives

in the previous 24 hours) are those listed in Figure 21.

Information displayed (Fig. 20, page 21 and above Fig. 21) includes Maximum

Depth, No Decompression Limit (Dive Time) available at that depth, and the

PDPS mode icon. No Decompression times are only displayed for depths where

there are at least 3 minutes dive time available at the depth, taking into account

a descent rate of 120 feet (36 meters) per minute.

No Decompression Dive Mode

WARNING: The Data100 must be manually activated and be in

the Surface Mode or PDPS Mode prior to start of a dive. The

unit will not activate automatically by immersion in water.

Upon descending deeper than 5 feet (1.5 meters), the Data100 will enter the No

Decompression Dive Mode, identified by the No Decompression Dive icon located

to the left of the Main Time display.

Fig. 21 - No Decompression

Limits

Depth NDL-hr:min

feet (meters) Eng (Metric)

30 (9) 4:20 (4:43)

40 (12) 2:17 (2:24)

50 (15) 1:20 (1:24)

60 (18) 0:57 (0:58)

70 (21) 0:40 (0:41)

80 (24) 0:30 (0:31)

90 (27) 0:24 (0:26)

100 (30) 0:19 (0:20)

110 (33) 0:16 (0:16)

120 (36) 0:13 (0:13)

130 (39) 0:10 (0:11)

140 (42) 0:09 (0:09)

150 (45) 0:08 (0:08)

160 (48) 0:07 (0:07)

DATA

100

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 91 92

No comments

Radio Shack 65-779 Specifications Page 32