DATA100
71
Power:
• Batteries Two 3 volt lithium cells, CR2032 or equivalent
• Life expectancy 50 - 24 hour periods of activation (approximate)
(variable number of dives)
• Shelf life See battery manufacturer's specs. (2 to 5 yrs.)
• Low Battery condition Replace both prior to diving.
Activation:
• Manual activation is required (water immersion does not activate unit).
• Cannot be activated deeper than 4 feet (1.5 meters)
• Cannot be activated at elevations higher than 14,000 feet (4,267 meters)
• Needed before the first dive.
• Automatically shuts off if no dive is made within 120 minutes after initial
activation.
• Cannot be shut off manually (only if the batteries are removed).
(Nitrogen calculation for repetitive dives would be lost).
External Access Mode:
• Not needed by the user, used by the factory for diagnostics / calibration.
• Mode is activated during the Surface or PDPS Mode when the activation
button is held in for more than 8 seconds.
• Activation when a Low Battery condition is initially indicated will cause
the flashing Low Battery icon to disappear implying satisfactory voltage.
(Batteries must be replaced prior to diving if Low Battery is displayed.)
• The letters 'EA' appear as the lower left display and a countdown appears
as the lower right display. After counting down from 6 to 0, the Data100
reverts back to the Surface or PDPS Mode.
Special Displays:
Occurrence
• Diagnostic Display Activation
• Out of Range 330+ feet (99.5+ meters)
• Gauge Mode Countdown Timer 12 - 24 hours after violation
• External Calibration Access (EA) If activation button is held for 8
sec during Surface or PDPS mode.
OPERATIONAL PERFORMANCE
Function: Accuracy:
• Depth ± 1% of full scale
• Timers 1 second per day
Dive Counter:
• Displays Dives #1 - #9 then recycles to #1 (and continues #1 - #9)
• Resets to Dive #1, upon diving (after a 12 hour surface time)
• Cycles to next Dive # at 5 feet (1.5 meters) depth after a 10 minute surface
interval
Dive Log Mode:
• Stores latest (most recent) 12 dives in memory for viewing
• After 12 dives, adds latest dive to memory, deletes oldest dive
Altitude:
• Altitude range 0 - 14,000 feet (4,267 meters) above sea level
• Modes Full computer functions up to 14,000 feet (4,267 meters)
• Activation not possible higher than 14,000 feet (4,267 meters).
• Recalibration of depth readings from 'feet of sea water' to 'feet of fresh water'
higher than 2,000 feet (610 meters) elevation.
SPECIFICATIONS (cont'd)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals