Radio Shack PRO-137 User's Guide download pdf (Page 30)

Using Signal Stalker I

To turn on Signal Stalker I, press Func + 0 /

Signal Stalker On appears. Every two seconds, the

scanner searches for frequencies in the range you

speciﬁed. When the scanner ﬁnds a frequency,

it alerts you according to its settings and Found!

Press any key appears. Press any key to conﬁrm the

displayed frequency. Rotate the knob to resume

scanning.

To turn off Signal Stalker I and turn on normal

scanning, press Func + 0 / .

If the Signal Stalker I Only Mode option is set to

on, pressing Func + 0 /

opens Signal Stalker I

in Only Mode. The icon ﬂashes.

Note: In Signal Stalker I Only Mode, the

scanner only tries to ﬁnd Signal Stalker I

transmissions. The scanner displays the band

meter for input signals in each band. If the

scanner loses a transmission, it resumes signal

stalker search.

Band Meter for Signal Stalker I

This meter allows you to see which band Signal

Stalker I is searching for. When a strong and

consistent signal is detected, this meter will rise

up to Max.

However, even if this meter rises to Max, the

scanner might not be able to catch the signal

if it is out of range or locked-out. To improve

performance if this happens, disable the band

by pressing the band number on the keypad.

Alternatively, disable the band within the Band

Switch in the Signal Stalker I options.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

No comments

Radio Shack PRO-137 User's Guide Page 30