Radio Shack 63-984 User Manual download pdf (Page 4)

low). Then insert an anchor into

each hole.

2. Align the metal mounting bracket

with the holes you just drilled and

drive a screw through the bracket

into each hole. Do not overtighten

the screws.

3. Align the slot on the back of the

transmitter with the hook on the

mounting bracket. Carefully push

the transmitter onto the hook and

slide it down to secure it.

4. Once the transmitter is securely on

the bracket, insert the two supplied

pan-head machine screws through

the two holes on the lower edge of

the transmitter and into the threaded

holes in the bracket.

Mounting the Receiver

To mount the receiver onto a typical

sheetrock wall, use the two supplied pan

washer screws and anchors. Other-

wise, consult your local hardware store

for suitable hardware.

1. Drill two

-inch diameter holes into

the mounting surface about 4

inches (106 mm) apart

2. Insert an anchor into each drilled

hole, then thread a screw into each

anchor, letting the head of each

screw extend about

inch from the

wall.

Inch Diameter Hole

50mm

85mm

Inch

63-984.fm Page 4 Wednesday, September 8, 1999 4:42 PM

1 2 3 4 5 6

No comments

Radio Shack 63-984 User Manual Page 4