Radio-shack 66 User Manual download pdf (Page 28)

28

5. Repeatedly press to highlight a chan-

nel number, then repeat Steps 3 and 4 to

create more call letter combinations (up to

10).

6. When you finish, press

MENU/ACTION

four

times to exit.

VIEWING A VIDEO TAPE

Loading a Video Tape

1. Turn on the TV and set it to the same chan-

nel as the VCR’s

3-CH-4

switch.

Note:

If you are using a TV/monitor that is

connected to the VCR’s

R-AUDIO-L/VIDEO

OUT

jacks, set the TV/monitor to its video

mode.

2. Hold the cassette with the main label fac-

ing up and the spine facing out from the

VCR. Then insert the cassette into the

VCR’s compartment and gently push the

center of its spine until the VCR draws it in.

The VCR automatically turns on. If the erase-

protection tab has been removed from the cas-

sette, playback automatically begins (see

“Erase Protection” on Page 38).

Caution:

Never insert anything except a VHS

video cassette into the cassette compartment.

Anything else might damage the VCR.

Playing a Video Tape

1. Load a video tape.

2. If playback does not automatically begin,

press

PLAY

. The VCR plays the tape.

Note:

During playback, the VCR automati-

cally adjusts tracking, but you can manu-

ally adjust it if necessary (see “Tracking”

on Page 30).

3. To choose the type of audio you want to

hear during playback, press

SAP/HiFi

until

an arrow appears next to the desired audio

mode indicator (

HiFi

or

NORMAL

) on the

TV screen.

Note:

If you play a tape recorded on a

standard VCR, the VCR plays the standard

audio track, regardless of the audio output

setting.

4. To stop playback before the end of the

tape, press

STOP

.

5. To eject the tape, press

STOP EJECT

on

the VCR.

Notes:

• If the tape reaches the end before you

press

STOP

or

STOP EJECT

on the VCR,

the VCR automatically stops the tape and

completely rewinds it. If the erase-pro-

tection tab has been removed, the VCR

then ejects the cassette.

• When the VCR is off, you can press

STOP

EJECT

on the VCR

to eject a tape. The

VCR turns on, ejects the tape, then turns

itself back off.

TAPE MOTION CONTROLS

Fast-Forward/Rewind and Visual

Search

While a tape is stopped, press

FAST-F

to ad-

vance the tape quickly or

REW

to rewind it. You

cannot see the picture or hear sound when you

use fast-forward or rewind, but you can use the

counter to locate a specific section of tape.

Note:

If you press

POWER

while a tape is re-

winding,

REWIND

POWER

OFF

appears.

The VCR automatically turns itself off when re-

winding is complete.

16-635.fm Page 28 Wednesday, July 21, 1999 9:03 AM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Comments to this Manuals

No comments