Radio-shack 66 User Manual download pdf (Page 43)

43

Checking/Changing VCR Plus+

Programs

1. Turn on the TV and set it to the same chan-

nel as

3-CH-4

on the back of the VCR.

Note:

If you are using a TV/monitor that is

connected to the VCR’s

R-AUDIO-L/VIDEO

OUT

jacks, set the TV/monitor to its video

mode.

2. Turn on the VCR and repeatedly press

TV/

VCR

until VCR appears.

3. Press

PROG

. You see:

4. Repeatedly press or to select

TIMER

PROGRAM

, then press . The

first four timer settings appear.

5. Repeatedly press or to select the

setting you want to change, then press .

6. Follow Steps 8–13 under “Timer Recording

with VCR Plus+” on Page 41 to correct the

selected setting.

7. When you finish, press

PROG

again, then

turn off the VCR.

AUTOMATIC TIMER

RECORDING

The VCR’s automatic timer lets you program it

to select an input source, start recording from

that source at a time you set, then stop record-

ing at a time you set. You can set up to eight

timers to record any combination of weekly,

daily, or one-time events.

You can set the VCR to record at any time on a

specific day within a 1-month period, at the

same time Monday through Friday (DAILY), or

at the same time on the same day every week

(WEEKLY).

Notes:

• The VCR can record only one broadcast at

a time. If you set the VCR’s timer to record

broadcasts on different channels that start

at the same time, the VCR only records the

broadcast that has the lowest timer num-

ber (see “Checking/Changing Timers” on

Page 45).

• If two timer settings overlap, the one that

starts first has priority. The VCR begins

recording the second broadcast after the

set time for the first broadcast is over.

• The VCR must be off at the start time you

set for it to begin an automatic timer

recording.

• If there is a power failure of more than 1

minute during a timer recording, the

recording does not resume after power is

restored.

• If there is a power failure of more than 1

minute before a start time, the VCR loses

the clock setting and therefore does not

start automatic timer recording. However, if

you have an EDS channel in your area and

set the VCR to automatically set the clock

from the EDS signal, the clock is reset

within 10 minutes after power is restored,

and the VCR records at the set time(s).

GR

A

M

A

M

Y

E

Y

R

A

M

-

-

-

-

-

-

2 : 00

A

08 SP

S

TOP CH SPD

16-635.fm Page 43 Wednesday, July 21, 1999 9:03 AM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

Comments to this Manuals

No comments