Radio-shack 66 User Manual download pdf (Page 39)

39

SELECTING THE SIGNAL TO

RECORD

You can select the signal to record — from the

IN FROM ANT.

jack or an audio/video source —

in either of these ways.

• Repeatedly press

INPUT

until the desired

input source appears —

LINE 1

or

LINE

2

for an audio/video source, or a channel

number for broadcast signals.

Select

LINE

1

for recording signals from

the back

R-AUDIO-L IN 1/VIDEO IN 1

jacks,

or

LINE

2

for recording signals from the

front

AV2

jacks.

• Repeatedly press

CH

s or t to set the VCR to

the desired broadcast channel or to one

channel higher than the highest channel

number (or one channel lower than the low-

est channel number) for an audio/video

source.

RECEIVING/RECORDING

STEREO/SAP BROADCASTS

The VCR has three channels for audio record-

ing — two (left and right) stereo channels on

the Hi-Fi track, and one monaural channel on

the standard track.

Press

DISP/ENT

to display the audio programs

available on the broadcast you are currently

tuned to.

STEREO

,

SAP

, and

MONO

appear on

the TV screen, and STEREO and/or SAP might

appear on the VCR’s display. On the TV screen,

(((

appears on the left of

STEREO

and/or

SAP

when available. For example, if a station broad-

casts mono (monaural) and SAP signals,

(((

SAP

appears on the TV screen and SAP ap-

pears on the VCR’s display.

The arrow to the right of the audio mode display

indicates the current audio mode. To select the

audio mode when the broadcast has a stereo or

SAP signal, repeatedly press

SAP/Hi-Fi

until the

arrow mark points to the desired mode.

IMMEDIATE RECORDING

Recording a Program as You

Watch It

Follow these steps to record a program as you

watch it. If you know how long the program is,

you can set how long the VCR records so it

stops recording automatically.

Note:

If you are watching the program on a TV/

monitor that is connected to the VCR’s

R-

AUDIO-L/VIDEO OUT

jacks, set the TV/monitor

to its video mode and skip Steps 2 and 3.

1. Turn on the VCR and the TV.

2. Set the TV’s tuner to the same channel as

3-CH-4

on the back of the VCR.

3. Press

TV/VCR

until VCR appears.

4. Load a blank cassette, or one that you

want to record over, into the VCR.

5. Repeatedly press

SPEED

on the remote

control until the desired recording speed

(

SP

,

LP

, or

SLP

) appears.

6. Select the signal to record (see “Selecting

the Signal to Record”).

7. Set the audio recording mode to the

desired setting. See “Receiving/Recording

Stereo/SAP Broadcasts.”

8. Press

REC/TIME

. The VCR starts to record.

Note:

To record without a set recording

length, skip Step 9.

9. Press

REC/TIME

again. The recording

length appears on the TV screen. Repeat-

edly press

REC/TIME

to advance the timer

to the desired recording length. The

recording length advances in 30-minute

increments up to 2 hours, then in 1-hour

increments up to 4 hours.

Notes:

• To ensure that you record the entire pro-

gram, set the recording length to longer

than the program length.

16-635.fm Page 39 Wednesday, July 21, 1999 9:03 AM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Comments to this Manuals

No comments