Radio Shack Telephone Listener User Manual download pdf (Page 21)

MicroLink CI S plugged into the

RadioShack speaker

TEMPO+, OPUS1 (remote battery pack) MED EL

Fitting

1. Connect the Remote Battery Pack (RBP) to the speech proces-

sor.

2 Turn RBP, MicroLink CI S and transmitter off.

3. Connect the white cable to the MicroLink CI S.

4. Plug the MicroMLxS into the MicroLink CI S. Leave the receiv-

er in the double green dot position.

5. Plug the MicroLink CI S into the remote battery pack.

6. Switch the RBP into MIX-Mode and turn the RBP on.

7. Turn on the FM system and gradually increase FM gain to a

comfortable level.

8. Determine speech perception ability with the FM signal in

quiet and in noise.

Troubleshooting

Performing a Listening Check

1. Plug the receiver and adapter into a test amplifier, e.g. Radio

Shack speaker, with the white patch cable.

2. Insert a battery into the MicroLink CI S and turn it on.

3. Put the MicroMLxS receiver in the double green dot position.

4. Turn on the FM transmitter. While speaking into the transmit-

ter, listen for the clear signal with minimal background noise.

This check will not reflect the sound quality that the patient

will hear but will confirm function and transmission of the

FM system.

5. To check the FM system, remove the MicroMLxS and plug it

into a working hearing aid and audioshoe or a Phonak

MicroLink Headset checker. Turn on the transmitter and listen

for a clear signal.

6. Follow your audiologist’s recommendations for conducting a

listening check of your speech processor.

Required Parts:

1. MicroMLxS

2. MicroLink CI S

3. White cable

Headset Checker

(Phonak part number 052-3126

[110V] and 052-3122 [220V])

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Radio Shack Telephone Listener User Manual Page 21