Radio Shack Telephone Listener User Manual download pdf (Page 22)

TEMPO+, OPUS 1 (angled battery pack) MED EL

Fitting

1. Turn speech processor, FM receiver and transmitter off.

2. Connect the red cable to the MicroLink CI S and attach to the

speech processor.

3. Turn the speech processor on.

4. Turn the FM system on and set the MicroLink CI S gain

to 3-3.5.

5. Determine speech perception ability with FM signal in quiet

and in noise.

How to Connect

1. Open cover at the angled part of the device by pulling

straight back (A) and lifting upward (B).

2. Insert the connector of the cable into the socket as shown.

The red dot on the cable connector should be on top. When

positioned correctly, the connector slides into the socket easi-

ly. Be careful not to force the connector into the socket the

wrong way.

3. Gently lower the cover until it rests on the connector (C).

There may be a “click” when you do this, which means that

the connector is securely locked in to the socket. This ensures

maximum protection of the connector.

Troubleshooting

Performing a Listening Check

1. Plug the receiver and adapter into a test amplifier, e.g. Radio

Shack speaker, with the blue patch cable.

2. Insert a battery into the MicroLink CI S and turn it on.

3. Put the MicroMLxS receiver in the double green dot position.

4. Turn on the FM transmitter. While speaking into the transmit-

ter, listen for the clear signal with minimal background noise.

This check will not reflect the sound quality that the patient

will hear but will confirm function and transmission of FM

system.

5. If the system is working with the blue cable, exchange the

red #14 cable and try again with the processor.

6. Follow your audiologist’s recommendations for conducting a

listening check of your speech processor. You may purchase

the microphone test devices from MED-EL for a speech

processor test.

7. To check the FM system, remove the MicroMLxS and plug it

into a working hearing aid and audioshoe or a Phonak

MicroLink Headset checker. Turn on the transmitter and listen

for a clear signal.

Required Parts:

1. MicroMLxS

2. MicroLink CI S

3. Red cable

4. Blue cable for testing

with RadioShack speaker

volume switch

program switch

sensitivity control

warning light

microphone

MicroLink CI S plugged into

the RadioShack speaker with

Blue cable.

Headset Checker

(Phonak part number 052-3126

[110V] and 052-3122 [220V])

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Radio Shack Telephone Listener User Manual Page 22

Comments to this Manuals

Related products and manuals for Telephones Radio Shack Telephone Listener