Radio Shack PRO-137 User's Guide download pdf (Page 27)

2. Rotate the knob to select the frequency you

want to clear from the skip frequency.

3. Press E

PGM

To clear all the skipped frequencies at once while

searching, press SRCH/PSE, then hold down

•CLR / L/OUT until the scanner beeps twice.

Notes:

• If you selected all frequencies to be skipped

within the search range, All channels Locked out! or

All ranges Locked out! appears. The scanner beeps

3 times and does not search.

• If you select more than 200 frequencies to

skip, L/O List Full! appears. Clear any skipped

frequency.

Signal Stalker I

Your scanner’ s Signal Stalker I feature lets you set

the scanner so it detects and then displays the

frequency of a nearby strong radio transmission.

Signal Stalker I works well for locating the source

of strong local transmissions, such as mobile and

handheld two way radios in areas with no other

strong transmission sources.

Signal Stalker I might not correctly display

frequency information for transmitters using a

highly directive antenna (such as an amateur radio

beam antenna), if there are many transmitters

operating at the same time in the same area, or if

the transmitter is a broadcast television station.

Setting the Signal Stalker I Options

1. Press Menu.

2. Rotate the knob to select 4: Signal Stalker,

then press E

PGM

. The Signal Stalker I menu

appears.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

No comments

Radio Shack PRO-137 User's Guide Page 27