Radio Shack 20-163 User's Guide download pdf (Page 18)

5. Press FUNC, then MODE.

6. Use the  or  to select the desired CTCSS or DCS code.

You can enter the code manually. The scanner automatically

lls in the code. See Appendix B for a list of codes.

7. Press ENT.

To save a CTCSS or DCS code:

Press ENT while the code appears.

Scanner Cloning

You can transfer the programmed data to and from another PRO-163

(or PRO-164) scanner using a connecting cable which has 1/8-inch

stereo (TRS) phone plugs on both ends (not supplied).

You can also upload or download the programmed data to or from

a PC using an optional USB cable and application software available

through your local RadioShack store. The application software is also

available online at www.starrsoft.com and www.scancat.com.

To clone the scanner data:

1. Turn on both scanners.

2. Connect the connecting cable to each scanner’s PC/IF jack. **

CLONE MODE ** appears.

3. Press . “Conrm to send data?” appears.

4. Press 1 to send the data to the other unit or press any other key

to cancel.

5. To exit the clone mode, remove the cable.

“CLONE MODE Incorrect Model” appears if you connect a

scanner other than a PRO-163 (or PRO-164).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 65 66

No comments

Radio Shack 20-163 User's Guide Page 18