Radio Shack 20-163 User's Guide download pdf (Page 41)

Locking Out Talk Group IDs

You can only lock out Talk Group IDs when the scanner is in the

Closed mode.

To lock out Talk Group IDs:

1. Press PROG then TRUNK.

2. Press FUNC,  or  to move to the desired bank.

3. Press  or  to select the ID.

4. Press L/OUT to lock out the ID. “lo” changes to “LO.”

5. To remove the lockout from a trunking ID, manually select the ID

memory, and press L/OUT. LO changes to lo.

You cannot clear all lockouts from a talk group at the same

time.

To review locked-out Talk Group IDs:

1. Press PROG then TRUNK.

2. Press FUNC. Then L/OUT. The rst locked out ID appears. If the

ID memory bank has no locked-out ID, you hear the low beep

tone.

3. Press  or  to scroll through the list.

4. Press PROG to exit.

Turning Off Sub-Banks

To turn off a sub-bank:

1. Press TRUNK repeatedly to select the desired sub-bank.

2. Press FUNC then 1 to turn the sub-bank on if it is off or off if it is

on.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 65 66

No comments

Radio Shack 20-163 User's Guide Page 41