Radio Shack 20-163 User's Guide download pdf (Page 8)

3. Remove the paper backing from each

washer and stick one inside of each

bracket’s ear, aligning the washer’s hole

with the bracket’s hole.

4. Attach the mounting bracket to your

vehicle’s surface using the supplied

screws and lockwashers.

Dashboard Installation

If you are unsure how to install your scanner in your vehicle, consult

your automobile manufacturer, dealer, or a qualied installer.

To mount in your dashboard, you must connect an external

antenna and speaker.

1. Before installing, conrm your

scanner ts in the desired

mounting area and you have all

the necessary materials. Your

scanner requires a 2 x 7

x 5

inch (50 x 180 x 135 mm) space.

2. Remove the four rear screws and

pull off the black case before

installing your scanner.

3. Install the DIN sleeve into the

opening in your dashboard, lip

facing out.

4. Push out the top and bottom tabs to hold the sleeve rmly in

place.

5. Slide the scanner into the sleeve until it locks in place.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

No comments

Radio Shack 20-163 User's Guide Page 8