Radio Shack 20-163 User's Guide download pdf (Page 37)

To search for Talk Group IDs:

1. Set the bank to Open mode.

2. Press SCAN. The scanner scans through all unlocked channels in

the active banks.

3. When the scanner stops on a transmission, press TRUNK. The

scanner displays the ID location:

Sub-bank. ID Location

0-4 00-29

Example: 2-01

If the ID has already been saved, “ID was saved” appears.

If you try to store more than 150 talk group IDs in a bank,

“Memory Full!” appears.

Saving a Talk Group ID

Each of the 10 banks contains 5 sub-banks that each hold 30 Talk

Group IDs. (You can save up to 1,500 Talk Group IDs.) When the

scanner receives a trunked transmission, it searches the associated

sub-bank for the Talk Group ID to decode data for Motorola, EDACS

(GE/Ericsson), and LTR (EF Johnson) systems.

To dene a Talk Group ID:

1. Press PROG, then press TRUNK to enter the ID program mode.

2. Press FUNC, then use  or  to select a bank.

3. Repeatedly press MODE to select a trunking mode (Motorola,

EDACS, or LTR).

4. Repeatedly press TRUNK to select the sub-bank.

5. Press  or  to select the location where to store the Talk Group

ID.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 65 66

No comments

Radio Shack 20-163 User's Guide Page 37