Radio Shack 43-141 Owner's Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
About once a month, fully dis-
charge the battery. Otherwise, the
battery loses its ability to fully
recharge. To fully discharge the
battery, set
RINGER
on the side of
the handset to
LO
or
HI
and keep
the handset off the cradle until the
CHARGE indicator starts to flash.
Then return the handset to the
cradle and fully recharge the bat-
tery.
For the best performance, you
should replace the supplied bat-
tery (Cat. No. 23-192, available
from your local Radio Shack
store) about once a year more
often if it is used heavily. When
the battery cannot fully recharge,
replace it with a new one. See
“Replacing the Battery’’ on Page
48.
CONNECTING THE BASE
TO THE PHONE LINE
1. Plug one end of the supplied mod-
ular cord into the
TEL LINE
jack on
the back of the base.
2. Plug the other end of the cord into
a modular phone line jack.
Notes:
If the phone line jack is not a mod-
ular jack, update the wiring. You
can convert the wiring yourself,
using jacks and adapters avail-
able at your local Radio Shack
store. Or, you can let the phone
company update the wiring for
you.
The phone company will charge
you for the installation of neces-
sary jacks.
The USOC number of the jack to
be installed is RJ11C.
ADJUSTING THE BASE’S
ANTENNA
For the best reception, fully extend the
base’s antenna and position it vertical-
ly.
43-738.fm Page 11 Friday, August 13, 1999 1:51 PM
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comments to this Manuals

No comments