Radio Shack 43-141 Owner's Manual download pdf (Page 34)

34

Note: Each pause or tone entry

uses one digit of the TAD’s 32-

digit memory capacity.

5. Press

MEMORY

to store the num-

ber. A long beep sounds and the

HOLD/INT indicator turns off.

Notes:

• If you receive a call while storing a

number, press

TALK

to answer the

call. After the call, begin again at

Step 2 to store the number.

• To delete a number from memory,

repeat all steps except Step 4.

Turning the Auto Call

Function On/Off

Once you have stored a pager or tele-

phone number and have selected and

stored a remote operation security

code, you can follow these steps to

turn on the auto call function.

Notes:

• You cannot turn the auto call func-

tion on if you have new messages

you have not listened to.

• If you have not stored the code

and number, the AUTO CALL indi-

cator flashes rapidly

1. If the TALK indicator is on, press

TALK

on the handset to turn it off.

Then, if the ANSWER or ANN

ONLY indicator is on, press

ERASE/STOP

on the base to turn it

off.

2. Press , then

MEMORY

. The

HOLD/INT indicator blinks and a

beep sounds.

3. Press

9

.

4. Enter the number of call attempts

using the number buttons (1-9).

5. Press

MEMORY

to store the set-

ting. The HOLD/INT indicator

turns off and a long beep sounds.

The AUTO CALL indicator on the

base turns on.

6. Press the button next to the

ANSWER indicator on the base to

set the TAD to answer calls.

You can change the auto call setting

remotely. See “Remote Operation” on

Page 36.

To turn the auto call function off, follow

Steps 1-6, but enter

0

as the number in

Step 4.

43-738.fm Page 34 Friday, August 13, 1999 1:51 PM

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Comments to this Manuals

No comments